Includes

• 2×Bracket(430 stainless steel)
• 2×Extension rod(430 stainless steel)
• 1×Rotating rod(430 stainless steel)
• 1×Multi-Function DC motor
• 4×Forks(304 stainless steel) with thumb screws(304 stainless steel)
• 1×Nylon Handle
• 1×Instructions

Dimension

Supports ovens(BBQ stoves) with inner diameters below 78cm(30.7”). They all clamping ovens(BBQ stoves) wall thickness are not exceeding 50mm(1.95”).

Bracket

Bracket using 2mm thickness stainless steel plate, with three heights, and using thread locking devices.

Multi-Function DC Motor

• Output : 2~5RPM
• Voltage: DC 5V(With 1 meter USB wire)
• Battery: 3pcs AAA batteries (not included, DON’T USE rechargeable battery)
• Rotator Port : 0~5.0kgf.cm(0~11 lbs)
• Roast Branch Size: 8 * 8mm / 0.32 * 0.32in
• Motor Size: 6.8 * 5.8 *6.5cm / 2.7 * 2.3* 2.6in

Normal Misalignment

Note: Thread processing needs to have a certain clearance, so it is difficult to have the same plane after the rod is tightened, and there will be a normal misalignment. At this time, you only need to loosen the rod a little, then put on the fork to the rod after the plane coincides. Tighten the rod after all the food is loaded.

About Power Bank

Note: Many power banks on the market have over-current protection functions. When the motor is used, the current passing through increases as the load increases. Once the allowable current is exceeded, the power bank will automatically cut off the power, which will cause the motor to stop, which is not the quality of the motor.

MOTOR WITHOUT BATTERY

The motor does not have a battery, you need to bring your own power bank or mobile phone charger for power supply. For the LED multi-function motor, you can also bring your own 3pcs AAA batteries (rechargeable batteries are not allowed) for power supply.
Because the motor is generally used in a high temperature environment, the built-in lithium battery is prone to explosion hazard.

If your BBQ stoves (ovens) or BBQ table can not be clamped

please click here